Contact Us

Tel:+86-510-83100991

Fax:+86-510-83100991

Mob:+8613656195367

Email:Sales@wxfk.net

Add:Rm. 1601, Maiku Bldg., Changjiang North Road, Wuxi, Jiangsu, China (Mainland)

Fake Football Grass

Fake Football Grass

It is made of high-quality PE, anti-aging agent and anti-UV agent, and refined by international advanced technology. It has similar appearance and performance to natural grass. It has high softness, good elasticity, comfortable and light pedaling, and safe touch. The movement touch feels good, the recovery after heavy pressure is good, the flexibility is wear-resistant, fire-retardant, anti-aging, heat-insulating and waterproof, the drainage speed is fast, and the overall pavement has good water permeability. The product is comfortable and durable, and has the advantages of anti-ultraviolet light, anti-corrosion, anti-mildew, environmental protection, safety and easy maintenance.

InquiryChat Now

  • Product Details

Fake Football Grass Introduction

It is made of high-quality PE, anti-aging agent and anti-UV agent, and refined by international advanced technology. It has similar appearance and performance to natural grass. It has high softness, good elasticity, comfortable and light pedaling, and safe touch. The movement touch feels good, the recovery after heavy pressure is good, the flexibility is wear-resistant, fire-retardant, anti-aging, heat-insulating and waterproof, the drainage speed is fast, and the overall pavement has good water permeability. The product is comfortable and durable, and has the advantages of anti-ultraviolet light, anti-corrosion, anti-mildew, environmental protection, safety and easy maintenance.

Technical parameters

Model

15mm grass stilt course lawn

Grass high

15mm

Pitch

3/16 feet

Number of needles per square meter

58800 needle

Roll width

4 meters or 2 meters

Roll length

25 meters

Ingredient

PP

Structure

Curved silk

Colour

Two-tone

Base

 PP+NET

Adhesive

Latex (SBR)

UV resistance index

DIN 53387 ≥6000 hr

Grass weight

235 g / square meter

Total weight

1235 g/m2

Shelf life

10 years

Features

1, all-weather use: not affected by the climate, improve the efficiency of the use of the site;
2, evergreen does not fade: after the natural grass enters the dormant period, artificial grass can still bring you the feeling of spring;
3. Greening and environmental protection: the materials are in line with environmental protection requirements, and the artificial grass surface layer can be recycled and reused;
4, simulation comfort: artificial grass is produced by the principle of bionics, good elasticity, comfortable feet;
5, economical and durable: durable, not easy to fade, especially suitable for sites with high frequency of use;
6, the service life: generally can guarantee the service life of more than five years;
7, simple maintenance: basically no maintenance costs occur, only need to prevent human damage;
8. Simple construction: It can be paved on the basis of asphalt, cement and hard sand.

Lawn Bonding Process
1. Preparation before bonding
The bottom surface of the turf to be bonded, the non-woven fabric, the joint cloth, etc. shall be cleaned and the surface shall be dry and free of moisture.
The ambient temperature should be selected above 5 °C. It is not suitable to work under rain and rainy weather. Otherwise, the bonding time will be too long or even non-stick.
2. The specific construction process
Gluing: It is required to use a brush to apply a thick and even surface on the surface. Do not apply glue repeatedly, otherwise foaming may occur or even fall. The base fabric is coated with glue, and the thickness of the glue is strictly controlled. Note that the speed of the glue should be appropriate. When applying the glue, it should be applied to the two bonding surfaces to be bonded. Adhesive: According to the actual temperature, humidity, pressure and other conditions at the time, the effective control of the open time. Generally, within 10-30 minutes after the application of the glue, the glue reaches 890% dry and the hand is not sticky. A one-time alignment is required for bonding. Never move the bonded object back and forth after bonding.
Pressurization: After bonding, remove the surface debris, and use a special rubber hammer to hammer the two sides from the joint, so that the surface is fully contacted and dense, and the bonding is firmer.
Curing: The curing time is generally three days, and the final strength of the silicon is generally ten days. Therefore, it is necessary to pay close attention to the maintenance during curing to avoid excessive exposure, flooding and movement to achieve the bonding state of silicon.
3. After bonding, clean the turf cut pieces of the site before the quartz sand and rubber particles are scattered.

image003.jpg

Lawn Maintenance
Within one to three months after the turf construction is completed, it is a stable period. During this period, the exposed grass can naturally cover the surface through normal movement, rain, temperature changes and other factors on the site, resulting in an unbiased surface. The filler will also be compacted and the drainage performance will gradually manifest; during this period, the uniformity and thickness of the filler should also be checked every two weeks for proper increase and decrease and adjustment of the flatness.

 

Hot Tags: fake football grass, China, manufacturers, suppliers, factory, OEM, price, customized
  • Feedback